![](http://www.okled.cc/UploadFile/large//20131216/IR440.jpg)
Place of Origin | China |
---|---|
Brand Name | Okled |
Model Number | IR440 |
Inquiry |
Product Specifications
Name: 44-key Infrared Controller
Model:IR440
Summarization
44-key infrared controller adopts the advanced micro control unit, it is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light, flexible light strip, wall washer lamp, glass curtain wall light and so on; it has many advantages such as low price, easy connection and simplicity to use. Meanwhile, you could adjust brightness, static color choices and various dynamic changes in lighting effects through infrared remote control. Besides, you also could adjust random color by yourself freely. In addition this product has short circuit protection function to make sure the load working normally.
Technical Parameters
Working temperature | -20-60 °C |
Supply voltage | DC5V, 12V, 18V, 24V optional |
0utput | 3 channels |
Connecting mode | common anode |
External dimension | L63ΧW35ΧH22 mm |
Controller dimension | L125ΧW56ΧH7mm |
Packing size | L130ΧW60ΧH35 mm |
Net weight | 60g |
Gross weight | 90 g |
Static power consumption | <1 W |
Output current | <2 A (each channel) |
Output power | 5V:<30W, 12V:<72W, 24V:<144W |
External Dimension
Interface Specifications
ITEM NAME |
PICTURE |
REMARK |
Power input interface |
|
dopt conventional power Transposon as a DC power input interface. |
Infrared receiver interface |
|
|
Load output interface
|
|
dopt oblate interface , and arrow is designate load output positive . |
Direction for use
1. Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;
2. Operation: you will receive infrared remote control in front of infrared receiver to ensure that there is no barrier between the remote controller and receiver;
The key-press functions are shown in the table as below (in accordance with the key position order):
Brightness rise(a total of eight grading) |
Brightness fall(a total of eight grading) |
Pause/Run |
On/Off |
Static red |
Static green |
Static blue |
Static white |
Static orange |
Static light green |
Static dark blue |
Static milk white |
Static dark yellow |
Static cyan |
Static lyons blue |
Static white pink |
Static yellow |
Static light blue |
Static purple |
Static green-white |
Static light yellow |
Static sky blue |
Static brown |
Static blue white |
Increase red |
Increase green |
Increase blue |
Speed up |
Decrease red |
Decrease green |
Decrease blue |
Speed-down |
DIY key1 |
DIY key2 |
DIY key3 |
Automatic change |
DIY key4 |
DIY key5 |
DIY key6 |
Flash on and off |
3 color jumpy change |
7 color jumpy change |
3 color fade change |
7 color fade change |
3. Line sequence setting instructions:
Press OFF key to close output , then push Brightness+ and load outputs RGB jumpy changing , last RGB line sequence is default . Meanwhile press Brightness- to switch six line sequence in order , and load output jumpy changing shows the current line sequence ; when one line sequence is selected , then press Brightness+ to shutdown load , and setting line sequence is saved . When push ON ,you will find line sequence is changing into the setup line sequence .
4. Additional notice:
When user want to DIY color , the first time you push the DIY button that it will enter customize color mode immediately , then press the six buttons on the controller to increase/reduce brightness of static red , static green ,static blue ( press any key except the DIY button can escape out of customize mode ,and the previous press is invalid ), and the second time you push the DIY button , the current color value will be saved . When the DIY button is pressed next time , it will show the recent color value saved .
There are 6 DIY key on the remote for you to set up six color freely ,and the button are individual not interactional . For instance ,press 1-key for one time , then press 2-key , and 1-key is invalid , so you should press 2-key again to save the current color value.
Typical Applications