Dream-color controller

Detailed Product Description

Summarization

Dream-Color controller is designed for led production which use HL1606 as driver , it has 128*128*128 grayscale , Length setup funtion and Power-fail memory function, you could choose it freely in a lot of programs. It is very useful for light box advertising,stage lighting,house decorating and so on.

 

 

 

Technical parameters

Working temperature: -20-60 °C

Supply voltage: DC12V

External dimension: L94 Χ W59 Χ H25 mm

Packing size: L160 Χ W95 Χ H51 mm

Net weight: 80 g

Gross weight: 115 g

Power rating: 2.2 W

Output: two groups SPI signal

 

 

 

External Dimension

 

 

 

 

Interface Specifications

         Power input interface:

 

 

 

Adopt conventional DC power Transposon as power input interface.

 

                   

        Signal output interface:

 

  

 

 Adopt 5-pin Connector pin.

 

 

Direction for use

1. Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;
2. Adopt button control,there are eight buttons altogether, and every button function as follows:

ON/OFF button,it can open or close led anytime,when led is in a state of closing,the LCD will

display IC NUMBER: ***,  *** is the value of current setting.

 

 

Play/pause button,when you want to see the static effection of led ,you may press this button to pause.

Adding button,to add the IC NUMBER,the most number is 255 (510 groups of RGB)

Reducing button,to reduce the IC NUMBER,the least number is 16 (32 groups of RGB);

Program choosing button,up direction,there are 83 programs in all.

Program choosing button,down direction;

Speed-down button,there are 100 steps in all;

Speed-up button.

3.  The description of signal output interface: L, K ,D, S is the corresponding signal of HL1606,which is L_I,CK_I,D_I,S_I.

Program description:(Condition: A1~Blue LED;A2~Red LED;A3~Green LED)

4.  Standard color changes as follows:

 

Typical Application