Full Color Touch Controller
| Place of Origin | China |
|---|---|
| Brand Name | Okled |
| Model Number | RF800 |
| Inquiry | |
Detailed Product Description
Product Specifications
Name: Full Color Touch Controller
Model: RF800
Summarization
Full-color touch controller is a high-end touch controller which adopts latest capacitive trigger and wireless technology. The controller has features such as large current, low power consumption; remote control adopts high precision capacitance touch control chip, has color ring and buttons function, increases the touch sensitivity, reduces trigger which caused by mistake. You can use remote control to switch the modes of RGB strips, and also can change the brightness and speed. It has advantages such as far control distance, high touch sensitivity, strong driving ability, stable performance. The product can control a variety of lamp whose source of light is LED. For instance, point source of light, flexible light strip, panel light etc.
Technical Parameters
Controller
| working temperature | -20-60°C |
| supply voltage | DC12V-24V |
| working current | <=8A/CH |
| connection mode | common anode |
| external dimension | L83ΧW79ΧH33mm |
| static power consumption | <1W |
| output frequency | 900Hz |
| output power | 12V:<288W, 24V:<576W |
Remote Control
Working temperature: -20-60℃
Power supply mode: AAA * 3
Supply voltage: 1.5V * 3
Standby power consumption: 0.025Mw
Static current: 85Ua
Working current: 200uA
Remote distance: > 20m
Standby time: >6 months
External Dimension (mm)
Interface Specification
“1“ “2“ : Power input interface, input voltage range is DC12-24V, “1“ is positive electrode, “2“ is negative electrode;
“3“ “4“ “5“ “6“: Power output interface, output voltage is 12-24V, max. output current is 8A, “3“ is positive electrode, “4“ “5“ “6“ is output channels.
Instruction for use
Function of controller and remote control:
: ON/OFF key, it is used for lighting on/off LED strips.
: Mode increase/reduce button, it is used for controlling increase and reduce of modes, total 18 kinds of modes.
: Color ring, when touching a certain point on the color ring, LED strip will show the color of color ring at this time.
: Brightness/speed button, in static modes, it controls the increase/reduce of brightness (total 25 levels), in dynamic modes, it controls the increase/reduce of speed (total 100 levels).
The standard change functions is shown as below table:
|
No |
Mode |
No |
Mode |
|
1 |
Static red |
10 |
Three-color gradual changing |
|
2 |
Static green |
11 |
Three-color crossfade |
|
3 |
Static blue |
12 |
Seven-color gradual changing |
|
4 |
Static purple |
13 |
Seven-color crossfade |
|
5 |
Static yellow |
14 |
Three-color flash |
|
6 |
Static cyan |
15 |
Seven-color flash |
|
7 |
Static white |
16 |
Three-color quick flash |
|
8 |
Three-color jumpy changing |
17 |
Seven-color quick flash |
|
9 |
Seven-color jumpy changing |
|
Autoplay |
Specification for matching code of wireless remote control and controller: When power on, close to the controller, at the same time press the ON/OFF key of remote control, long press this key in 3s to match code. The load light will flicker after matching code success.
Typical Application
Remarks
1. Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power.
2. Power supply voltage range is DC12-24V, more than voltage range maybe burn out the controller.
3. Stop to use for more than 30s, the remote control will enter the standby state, then the color ring will fail, The next time use, just click the button on remote control, then remote control will be reawakended.