Place of Origin | China |
---|---|
Brand Name | okled |
Model Number | TM08E |
Inquiry |
Product Specifications
NAME: Low-Voltage Touch Panel Full-color Controller(European Standard)
MODEL: TM08E
Summarization
Touch panel controller is a new high-end controller which newly developed by our company. It adopts glass panel design, is beautiful and fashionable in appearance. It adopts high precision capacitance touch control chip, increases the touch sensitivity, reduces trigger which caused by mistake. It is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light,flexible light strip, panel lights etc., it has many advantages such as convenient to connect, easy to use and others.
Technical Parameters
Working temperature: -20-60 °C
Supply voltage: DC12~24V
Output voltage: DC12~24V
Output: 3 channels
Connection mode: common anode
External dimension: L80 Χ W80 Χ H41.8mm
Packing size: L105 Χ W105 Χ H53 mm
Net weight: 130.6g
Gross weight: 181g
Static power consumption: <1W
Output current: <4A(each channel)
Output power: 12V<144W, 24V<288W
External Dimension
Unit: mm
Interface Specifications
“1”, “2”: power input pins, input voltage range is 12-24V, “1” is negative pole, and “2” is positive pole.
“3”, ”4”, “5”, “6”: power output pins, output voltage is 12-24V, maximum output current is 12A, “3” is positive pole, “4” is interface of red light, ‘”5” is interface of green light, ‘”6” is interface of blue light.
Controller Instruction:
: in static mode, you can adjust brightness 0-255 quickly, up to 64 touch points, in dynamic mode, you can press it to switch to static mode.
: you could turn on/off controller at any state; When the dimmer is turned on, long press the key for 3 seconds, you can turn on/off output of buzzer;
: 19 kinds of dynamic mode switching cyclically;
: 20 kinds of static mode switching cyclically;
: in static mode, brightness reduce key, total 255 levels; in dynamic mode, speed reduce key, total 10 levels;
: in static mode, brightness increase key, total 255 levels; in dynamic mode, speed increase key, total 10 levels;
Dynamic mode is shown in the below table:
Mode No. |
Function |
Mode No. |
Function |
Mode No. |
Function |
1 |
red burst flashing |
8 |
Three-color jumping |
15 |
purple gradually fades |
2 |
green burst flashing |
9 |
six-color jumping |
16 |
white gradually fades |
3 |
blue burst flashing |
10 |
red gradually fades |
17 |
three-color gradually fades |
4 |
yellow burst flashing |
11 |
yellow gradually fades |
18 |
seven-color gradually fades |
5 |
white burst flashing |
12 |
green gradually fades |
19 |
seven-color gradual changing |
6 |
Three-color burst flashing |
13 |
cyan-blue gradually fades |
|
|
7 |
Three-color flashing |
14 |
blue gradually fades |
|
|
Typical Application
Installation Method
1. open touch panel
Gently pry gaps in touch panel with a screwdriver, and then you can slowly remove the panel, as shown below;
2. wiring
Connect wiring according to typical application. Refer to typical application;
3. Install switch base
As shown in the picture, mount the controller on the cassette in the wall after connecting the wire, and then nail the screw, fix it on the wall, finally you can install the switch pedestal on the wall;
Remarks:
1. Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;
2. The supply voltage of controller ranges in DC12V~DC24V, it may burn out the controller once exceed the voltage ranges.