LST-S201 Plastic shell RF 5 keys Touch led dimmer

Detailed Product Description

 Product Specifications

Model Number:LST-zd-TQ-S201

Products name: LST-S201 Plastic shell RF 5 keys Touch led dimmer

Product Description

  This RF touch Single color led dimmer adopt the RF wireless remote control,can adjust brightness infinitely to change the lights brightness according to the customer’s preference.

Technical Parameters

    Working temperature:-20~55℃

    Supply voltage:DC12V~24V

    Output:2 Channel(2Channel signal are the same)

    Connection mode:Common anode

    Controller size:L85×W45×H23mm

    Net weight:88g

    Static power consumption:<1W

    Output current:<4A/CH

    Output power:12V:<96W;24V:<192W

Direction for use

 Function introduction:

1,Use the RF remote control, no need to make the remote direct to the controller,and the RF remote can controlled it across obstacles.

2,In the open area remote control distance is over 30 meters;

3,Each controller and the remote are stick with an unique ID on it,each controller can be study two remote control’s ID,this means one controller can be controlled by two remote at the same time.Besides,this controller can make it to be controlled by the unique remote , or make one remote to controlled many controller as well.(remarks:need to make to order)

 Operation method:

1.Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;

2.Adopt wireless 433.9mhz RF Touch 5 keys remote control, its function as follows:

Match code function Instruction: Every dimmer is already match code with the unique remote(the ID in the remote and the dimmer are the same),if the user want to match code again, then just need to press the ON/OFF key for FIVE times within 5 seconds after powered the dimmer.

 Remarks:One receiver can be match code with two remote at the same time.if one remote match code with many receiver, than can realize one remote to controlled many receiver.