RF CONSYN CONTROLLER（Master）

Detailed Product Description

 

1,Summarization

        Wireless synchronization controller is used to control full-color RGB LED strip the new controller, the controller can select the DIP switch on the communications frequency, so as to achieve the same frequency as the primary communication, the effect of changes synchronized from the controller. Set the dial code for each controller can be in the main, from the control function of conversion.Lord, from the data transmission between the controller by wireless means, its easy to use, no signal cable between the controller, therefore, particularly suitable for the alignment between the controller inconvenient occasions. The distance wireless transceiver and controller work related to the environment, indoors, 20 to 50 meters communication distance is a stable and efficient, open air environment, the effective distance is farther.
 

 

2,Master controller technical parameters

working temperature	-20-60°C
supply voltage	DC12V
grey grades	256
Connecting mode	common anode
Communication frequency	433.05~434.79MHz
output	3 channels
external dimension	L126×W65×H30mm
Packing Size	L168ΧW133ΧH50 MM
Net weight	249g
Gross weight	302g
static power consumption	<1W
Output current	<4A(each channel)
Output power	12V:<144W

 

 

 Slave controller technical parameters  

 

working temperature	-20-60°C
supply voltage	DC12V
grey grades	256
Connecting mode	common anode
Communication frequency	433.05~434.79MHz
output	3 channels
external dimension	L126×W65×H30mm
Packing size	L133xW70xH35mm
static power consumption	<1W
Output current	<4A(each channel)
Output power	12V:<144W

 

 

 

External Dimension

 

 

 

                            Master controller

 

 

                           Slave controller

 

 

Interface Specifications of Master controller

 

  Power input and Load output interface:

 

 

 

Power input is DC12V, output is RGB signal, lamps adopt common anode connection.The interfaces from left to right are: B, G, R, COMM, power supply positive (+), power negative (-)

 

  Button Function:

  Mode: mode switch button, a total of 11 modes;

 

 Para: It is used for setting the parameters, press for one time, you can set the speed; press for two times, you can set the brightness, setting ranges from 0 to 99; press for three times, you can set the frequency, frequency setting ranges from 0 to 15;

 Up: It is used for increasing the parameters, you can increase the corresponding values;

 Down: It is used for reducing the parameters, you can reduce the corresponding values;

The key-press functions of remote controller are shown below in accordance with the key position order:

turn on/off load	pause	three-color jumpy changing
three-color gradually changing	seven-color gradually changing	seven-color jumpy changing
static red	static green	static blue
static purple	static cyan	static yellow
static white	parameter increasing	parameter reducing

 

 

Interface Specifications of Slave controller

 

Power input and Load output interface:

 

 

Power input is DC12V, output is RGB signal, lamps adopt common anode connection.The interfaces from left to right are: B, G, R, COMM, power supply positive (+), power negative (-)

DIP switch for select the frequenct and mode:

  

DIP switch instruction for selecting the frequency:

 

Total 4 DIPs, you can choose 15 ID codes, the output mode of slave controller will be in synchrony with the maste controller which has the same frequency with slave controller.

 

DIP switch instruction for selecting the mode:

 

Total 10 DIPs, screen printing on the DIP switch are DIP codes, screen printing on the shell is the represent value when corresponding DIP switch is pressed ( It is used for selecting the speed in the jumpy and gradually changing). The speed value is the sum of all the values which corresponding DIP switch is pressed. In static mode, if more than one DIP are pressed, only the mode that the DIP with the smallest DIP code represents for is valid. When the tenth button not pressed, it is the built-in function mode, otherwise it's the slave control mode. 

 

Functions are shown as the below table:

 

 

Direction for Use

1. Connect the signal wire at first, and then the load wire, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;

2. Slave controllers around should be set up around the master controller;

3, The effective distance of the controller is related to the working environment. The effective distance indoors is 20 to 50 meters, the more spacious outdoor environment, the farther of the effective distance

 

 

 

Typical Applications

 

 

Note: a mster controller is necessary within the same working area.