SD card DMX signal decoder

Detailed Product Description

Summarization
     SD card DMX signal decoder is one of our company standard products, it saves the editor good pattern document by the SD card, the output is the SPI signal. May be controlled in DMX controls Taiwan or other DMX control device, may also through dial the code switch choice broadcast the document and the speed. It can carry out jumpy changing, the gradual changing, horse race, running water, chase, the frequency dodges and other effects of change. User can also edit the data flies through the incidental pattern editing software（Led Editor v1.0）, kinds of change pattern , easy to use , The specific method of editing software see instructions
 

Technical parameters
● working temperature: -20-60
● supply voltage: DC12V 
● support the channel number:512
● output: SPI
● Maximum number of documents pattern：62
● external dimension :L224ΧW128ΧH37 mm
● packing size ：L230ΧW180ΧH55 mm
● net weight : 320g
● gross weight: 355g
● static power consumption ：<1W

 

 

External Dimention

 

  

 

 

 

 

Interface Specifications 

 

         Power input, SPI signal output and SD card interface:

            

          DMX input/output interface: card mixer interface:

                 

            

          DMX input/output interface: on RJ45

                     

 

Code and function settings interface:

     

 

 

 

 

Direction for use

The controller has two control modes: dial control and DMX control. When the last dial switch (FUN) when to dial control mode, otherwise, DMX control modes.

1,Dial the code switch control

The last switch disconnect when the dial control, in this way: the first 6 dial switch (1 ~ 6) choose to play the file number, you can select up to 62 files when this six switch value is valid in the SD card LED file count plus 1, i.e. to loop all files. Articles 7, 8, 9, dial switch to select speed dial, on the basis of its value, will be divided into eight-speed gear. Three dial is pressed, playback speed to file the initial setting.     

2,DMX control method

    Controller's DMX address corresponds channel for selection of file channel, address +1 correspondence channels for speed control channel. For example: The address is 1, the type color selector channel is CH1, the speed control channel is the CH2, DMX channel value (0~255) channel value is bigger, the speed is quicker.

 note:   Each DMX module takes 2 channels, DMX the module ID value should defer to 1, 3, 5, 7, 9   Rule edition.

 

DMX address setting

     Each DMX universal controller takes 2 DMX addresses, uses the addressable switch establishment address, addressable switch 1-9 is establishes DMX the outset address the binary value addressable switch, 1st for the most low position, 9th is a highest order, altogether may establish 511 addresses. The DMX outset address = addressable switch 1-9 position value sum total, the addressable switch will dial downward (ON to set 1), may obtain this position the position value; The addressable switch dials upwardly (sets 0), then this position's position value is 0.  

   Code switch FUN(10)=OFF(0)can accept DMX signal

 

1),   example one:

     As Figure 1 ,DMX start address code set to 37, the encoding switch 6, 3, 1, 1, and the remaining position is at position 0, the encoding switch 1-9-bit to 32-bit values sum + 4 + 1, or as the starting address code 37 DMX512.

                          

 

 

2),    example two:

     Like Figure 2, must suppose the DMX outset address is 328, the addressable switch's 9th, 7, 4 positions will dial will be 1, other positions are 0, this time the addressable switch 1-9 position value sum total is 256+64+8, is the DMX outset address 328. 

                             

 

 

 

Typical Application