SD card SPI controller

Detailed Product Description

Summarization
 SD card SPI controller adopts the advanced micro-control unit, it is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light, flexible light strip, wall washer lamp, glass curtain wall light and so on;。The system can search and read the first "*led" data files when power on, And the documents and patterns of data communications sent by LPD6803。It has many advantages such as low price, easy connection and simplicity to use. According to the actual need of customers, it can carry out jumpy changing, gradual changing, strobo flash and other effects of change.User can also edit the data flies through the incidental pattern editing software（Led Editor v1.0）, kinds of change pattern , easy to use , The specific method of editing software see instructions

 
Technical parameters
● working temperature: -20-60                             
● supply voltage: DC12V-24V
● external dimension :L128ΧW64ΧH24 mm                  
● packing size ：L160ΧW95ΧH50 mm
● net weight : 185g                                      
● gross weight: 215g
● static power consumption ：<1W                         
● output: one SPI signal
●output power:12V:<144W                                 
● Frame frequency: 1--25 frames per second                
● Control points: 512
● Grey: 32~256 magnitude
● communication Format: LPD6803

 

External Dimention

 

 

 

 

 

 

 

Interface Specifications 

 

         Power output interface(mode1):

 

             

 

 

Adopt conventional DC power transposon as power input interface, and equip

with DC plugs line

mode1)        ations and change

 

 

Power input interface ( mode2 ):

 

   Adopt male and female connector with screw.

                                    

              

 

Load output interface:

 

 

          Adopt male and female connector with screw

 

 

 

 

 

Direction for use

 

1,Connect the load wire at first, following by the power wire; Please ensure short circuit can not           occur between connecting wire before you turn on the power.

 

2,The product of the power supply voltage 24V, not for DC12V ~ AC220V received.

 

3,Make sure SD card is formatted (FAT32).

 

4,If you want to put out the SD card ,please power off first, otherwise the SD card will be broken.

 

5,It is best to delete the extra files, make sure the document which read is needed..

 

6,All the parameters in the factory has according to user's requirements and using environment, if the user configuration needs to change control mode

 

And edit data files, please read carefully designs with relevant documents (according to the different choices and drive chip level, gray LPD6803 format for communication.

 

7,If you need other communication format (LPD6803 / WS2801 / TM1803 / DM413 / TM1809 / D705 etc), please indicate when ordering.

  

 

 

Typical Application

 

Applied circuit 1: